10 Series - Microphones & Audio Accessories

10-3
Gooseneck Paging Microphone

Unidirectional 18" gooseneck microphone with XLR male socket with push On/Off talk button.

Specifications: - Low-Z (600 ohms)
- Sensitivity: 80dB +- 3dB
- Frequency response: 60-12Khz.
- Color: Black

10-9
Windscreen.
2 3/4" High Screen.
Universal Type, fits slim models from 3/4" to 1 1/8".
Black

10-10
SUPER CARDIOID SHOTGUN MIC
Super directive use. Can pick up objective sound clearly even in noisy environments. Shakeproof holder acts as a vibration damping mechanism and helps eliminate unwanted mechanical and motor noises. Impedance 600W; (1 KHz). Complete with Case and Windscreen. 3.5 mm plug.

Specifications:
Type..................... Electret Condenser Microphone
Frequency Range.................... 50 Hz–10 KHz
Directivity....................................Super Directional
Std. Working Voltage...................... 1.5V (DC)
Sensitivity........... -60 db (1 KHz 0 dB = 1V/u Bar)
Current Drain.................................. 1 mA Max
Output Impedance............................600W;(1 KHz)
S/N Ratio. 40 dB or more (1 KHz, JISA-curve)
Battery type Size "AA" Penlite Cell 1.5Vdc (included)
Color....................................................... Black

10-12
MINIATURE ELECTRET CONDENSER MICROPHONE
This microphone is designed for all uses. ON/OFF switch enclosed on the beltclip for easy use. Designed for quality at a low cost. 15ft. cable is terminated with a 3.5 mm plug.

Specifications:
Type..................................... Electret Condenser Impedance..................................... 1KΩ(at 1KHz) Frequency Response......................... 50-18KHz Power Supply........ 1.5 volt AAA battery (included) Sensitivity............................... -65 dB at 1000Hz Accessories......... 3.5mm to 1/4" adapter, Battery, Tie Clasp, Wind Screen Polar Pattern............................ Omni-Directional Power Supply Size..... 2.51” L x 1.84” W x .54” H Color.............................................................. Black Microphone Size.......................... .25” L x .54” W Cord to Mic Length............................................ 38”

Availability: ships same day.

10-15A
SUPER CARDIOID SHOTGUN MIC
This microphone is for Super-Directive use with high sensitivity and extremely low noise. It can pick up clearly and naturally the object's sound even in noisy environment of both short and long distance. The 10-15 microphone is designed primarily for operational efficiency and well suited to outdoor sports broadcast, stage, video and movies. Can be hand held, stand mounted or mounted on video or movie equipment. Terminated to a 3.5mm plug.

Specifications:
Type.............. Super Cardioid Electret Condenser
Output Impedance..... For short distance: 520Ω
System Switchable uni-directional system for short and long distance

For long distance: 2.3KΩ and short distance
Sound Pressure Level................... 120 dB Max
Sensitivity: For short distance: -66 dB (1 V/u bar 1 KHz
For long distance: -56 dB (1 V/u bar 1 KHz)

Signal to Noise Ratio................. 40 dB or More
Cable............................ coiled with 3.5 mm plug
Frequency Response:.............. 80 Hz–12,000 Hz
Accessories.......... Wind Screen and Mic Holder
Power Source 1.5Vdc, AA Size Battery (not included)
Color......................................................... Black

Availability: ships same day.

10-17
SHOTGUN MICROPHONE
This is a high quality sound locating shotgun microphone. It is equipped with a high quality internal amplifier and earbud type earphones. Can be easily mounted on camcorders, binoculars, or hand-held. It has an adjustable volume control for clear output. The supercardioid pattern is designed for medium range frequencies to isolate and pick up human voices at directional short distances.

Specifications:
Microphone Electret Condenser
Weight 65 grams (incl. battery & earphones)
Pattern Unidirectional Supercardioid
Earphones Inner-ear Type Stereo -32 W
Output Level 5m watts MA at earphone
Measurements 238 (L) X 30 (H) X 17 (W)
Acoustic Gain 50dB
Accessories Earbud Headphones, Mounting Hardware, and Directional Tube, Thread Adapter
Frequency Response 200-15 KHz
Power Source 1 AAA Battery
Included Windscreen
Color Black
Battery Life 100 hours (continuous operation)
Microphone Color Black

10-19
Desktop Microphone Base.

Push On/Off talk switch with red L.E.D. indicator, requires 2 AAA batteries.
Female XLR mic input to Male XLR output.
Sturdy weighted base.
Color is black.

10-20 Dual Impedance Dynamic Microphone

10-22
ECONOMY DYNAMIC MICROPHONE
This uni-directional dynamic microphone has a 10 ft. cable terminated to a 1/4" phone plug. A windscreen is built into the wire mesh ball head to prevent hiss, pop, and wind noise.

Specifications:
Impedance 500W
Sensitivity -72 dB ± 3 dB at 1 KHz
Frequency Response 80–12 KHz
Color Black

10-31BK
Microphone Stand.
Black stem with 3/8" - 16 thread connector and detachable 5/8" - 27 screw adapter for microphone holder.
Round Base Weight 5 lbs.
Height collasped 35", extended 64".

The 10-31BK is the Black version

Picture illustrates the different stands.

10-31BK
Microphone Stand.
Black stem with 3/8" - 16 thread connector and detachable 5/8" - 27 screw adapter for microphone holder.
Round Base Weight 5 lbs.
Height collasped 35", extended 64".

The 10-31 is the Polished Chrome version

Picture illustrates the different stands.

10-32
Microphone Stand.
Polished chrome plated finish with 3/8" - 16 thread connector and detachable 5/8" - 27 screw adapter for microphone holder.
3 leg base with tubular legs. Legs braced with non-skid rubber tips.
Weight 5 lbs.
Height collasped 35", extended 64".


The 10-31BK is the Black version

Picture illustrates the different stands.

10-33
Microphone Stand.
Polished chrome plated or black finish stem with 3/8" - 16 thread connector and a detachable 5/8" 27 screw adapter for microphone holder. Heavy duty, compact, extra high elevation adjustment.
3 leg base with foldable tubular legs.
Boom accessories incuded with stand for greater adjustment and versatility
Weight 7 lbs.
Height: collasped 33", extended 63".

10-34 Gooseneck Base. Surface mounting, die cast base, fits most gooseneck types with 5/8" threads. Base has MALE threads. 1/75" base diameter

10-35
GOOSENECK BASE
Surface mounting, die cast base, fits most gooseneck types with 5/8"-27 threads. Base has Female thread. 1.75” base diameter.

10-36-6 (6 inch)
CHROME MICROPHONE GOOSENECKS
5/8" - 27 connecting thread, Male to Female on ends.

10-36-6 (6 inch)
CHROME MICROPHONE GOOSENECKS
5/8" - 27 connecting thread, Male to Female on ends.

10-36-13-BK
MICROPHONE GOOSENECKS, Black
5/8" - 27 connecting thread, Male to Female on ends.

10-36-19 (19 inch)
CHROME MICROPHONE GOOSENECKS
5/8" - 27 connecting thread, Male to Female on ends.

10-36-19-BK
MICROPHONE GOOSENECKS, Black
5/8" - 27 connecting thread, Male to Female on ends.

10-36-6-BK
MICROPHONE GOOSENECKS, Black
5/8" - 27 connecting thread, Male to Female on ends.

10-37
USB PC MICROPHONE
Calrads new professional podcasting PC microphone is easy to use, simply plug-in the USB cable to your PC or laptop. Select the microphone from the list of available devices under voice recording in windows. 16 bit A/D converter for low noise and precise audio reproduction. Great for making digital voice recordings.

SPECIFICATIONS
Frequency Response: 50hz~18KHz
Polar Pattern: Uni-directional
Mic Element: Output Impedance 600W +/-30%
Output Level: -65db+/-3db
A/D Converter 16 Bit Resolution, 48KHz Sampling
Cable: 10 ft. USB type 'A' Male to USB mini Male (Included)
Mike Holder and 3.9" Base-Stand (Included)
Overal Height: From base to the top of the microphone, 9.5"
Color: Black

10-45
MICROPHONE CABLE
Professional Series, 3-wire balanced line with Female XLR type connector on one end, 1/4” Male mono plug on the other end.
Uses shielded, black rubber jacketed cable. Available lengths
10-45-20................................. 20 ft.
10-45-25................................. 25 ft.

10-45
MICROPHONE CABLE
Professional Series, 3-wire balanced line with Female XLR type connector on one end, 1/4” Male mono plug on the other end.
Uses shielded, black rubber jacketed cable. Available lengths
10-45-20................................. 20 ft.
10-45-25................................. 25 ft.

10-50
MICROPHONE RETRACTABLE COIL CORD
Excellent for CB or Ham radio replacment mic cable. 3 conductor shielded cable. 5ft extended or 2ft retracted

10-54
DESK MICROPHONE STAND
Mike stand with 5/8" - 27 thread. Black metal base 4" diameter, rod length is 3" from top of base.

10-55
desk microphone stand
a beautiful modernistic desk stand. "u" shaped base finished in black. supplied with a polished chrome upright tube, threaded 5/8”–27 at both ends. can be used with the other mic accessories.

10-56
DESK MICROPHONE STAND - Tripod
Sturdy, lightweight, skidproof folding legs for portability. Accepts most microphone holders with 5/8" - 27 thread. Stand spread 7". Individually packaged for display racks.

10-58
VIDEO CAMERA MICROPHONE "Hot Shoe" Attachment
For attaching microphone to video camera, movie camera, etc. Has knurled locking knob to hold tightly.

10-59
MICROPHONE ATTACHMENT
Fits any floor stand with 5/8" - 27 top end thread.
Accepts 3-microphone holders with 5/8" - 27 connecting thread.
Microphone spacing is 2 1/2”.

10-59-A
MICROPHONE ATTACHMENT Holds 5 MICS
Picture above is of the Microphone Attachment part 10-59
Fits any floor stand with 5/8" - 27 top end thread.
Accepts 5 -microphone holders with 5/8" - 27 connecting thread.
Microphone spacing is 2 1/2”.

10-60
UNIVERSAL CLAMP-TYPE MICROPHONE HOLDER
Adjustable holder with brass insert. Holds microphones 5/8"-13/8" in diameter.

10-61A
SLIDE-IN MICROPHONE STAND HOLDER
Made of high impact black plastic. Tapered design. Fits standard mike stand 5/8” x 27.
10-61A fits 7/8" dia. mics

10-63A
SLIDE-IN MICROPHONE STAND HOLDER
Made of high impact black plastic. Tapered design. Fits standard mike stand 5/8” x 27.
10-63A fits 1" dia. mics

10-64A
SLIDE-IN MICROPHONE STAND HOLDER
Made of high impact black plastic. Tapered design. Fits standard mike stand 5/8” x 27.
10-64A fits 1 1/4" dia. mics

10-65
HIGH TENSION MICROPHONE CLAMP
Used to clamp microphones to tables or fits standard mic stands 5/8”-27 thread 3 rubber pads on the inside of the jaw provides a strong protective grip. The Jaw opens to 2.5”. Color: black

10-67-BK(Black)
2 1/2" high wind screens to fit 1 3/8" to 1 3/4" diameter microphones.

10-67-GN(Green)
2 1/2" high wind screen to fit 1 3/8" to 1 3/4" diameter microphones.

10-67-RD (Red)
Windscreen
2 1/2" high wind screen to fit 1 3/8" to 1 3/4" diameter microphones.

10-67-YL (Yellow)
Windscreen
2 1/2" high wind screen to fit 1 3/8" to 1 3/4" diameter microphones

10-68-BK (Black) Windscreen for spherical head microphones 1 5/8" High to fit over 1 3/4" to 2" microphones.

10-68-BU (Blue) Windscreen for spherical head microphones 1 5/8" High to fit over 1 3/4" to 2" microphones.

10-68-GN (Green) Windscreen for spherical head microphones 1 5/8" High to fit over 1 3/4" to 2" microphones.

10-68-OR (Orange) Windscreen for spherical head microphones 1 5/8" High to fit over 1 3/4" to 2" microphones.

10-68-RD (Red) Windscreen for spherical head microphones 1 5/8" High to fit over 1 3/4" to 2" microphones.

10-68-YL (Yellow) Windscreen for spherical head microphones 1 5/8" High to fit over 1 3/4" to 2" microphones.

10-69
7/8" High windscreen fits 1/4” to 1/2" microphone. Designed to fit lavalier type microphones.

10-69-BK (Black)
7/8" High windscreen fits 1/4” to 1/2" microphone. Designed to fit lavalier type microphones.

10-69-GN(Green)
7/8" High windscreen fits 1/4” to 1/2" microphone. Designed to fit lavalier type microphones.

10-69-YL
7/8" High windscreen fits 1/4” to 1/2" microphone. Designed to fit lavalier type microphones.

10-69-RD
7/8" High windscreen fits 1/4” to 1/2" microphone. Designed to fit lavalier type microphones.

10-75
STEREO LINE MIXER
Passive stereo line mixer for camcorders and Hi-Z line level signals.
2 Hi-Z line level stereo audio inputs to 1 stereo output with RCA jacks.
Individual slide style volume controls.
Black shielded metal chassis.
Size: 5”(W) x 1.7”(H) x 3.4”(D).

10-76
DUAL IMPEDANCE LINE MATCHING TRANSFORMER
Comes with built-in High/Low switch. No wiring necessary. 1/4" Male mono plug with switchable input between 600W / 50KW to 600W XLR Female output.

10-77 DUAL IMPEDANCE LINE MATCHING TRANSFORMER
Comes with built-in High/Low switch. No wiring necessary. 1/4" Female mono jack with switchable input between 600W / 50KW to 600W right angle 1/4” Male mono plug on a 6 inch cable.

10-78 TELCO & MULTIMEDIA GROUND ISOLATION TRANSFORMER
Audio isolation transformer. 600W to 600W. Helps prevent ground loop problems. Used for computer and telephone applications. Male to Female mono 3.5mm connectors. Over all length 10 inches.

10-78-RCA - RCA ANALOG & DIGITAL GROUND ISOLATION TRANSFORMER
Provides protection from ground loops. Used for standard low level analog and digital audio signals. Bandwidth up to 50KHz. 1:1 transformer. One RCA jack to one RCA plug. Overall length 10 inches Two pieces required for stereo use

10-79
DUAL IMPEDANCE LINE MATCHING TRANSFORMER
Comes with built in High/Low switch. No wiring necessary. 1/4” Male mono plug switchable input 600W / 50KW to 600W XLR Male output.

10-83 (3/8" dia.) 2 pin,
ELECTRET CONDENSER MICROPHONE ELEMENTS
Miniature in size, excellent quality.
Working voltage range from 2–10 Vdc.
Output impedence is Low-Z.
P.C. Mount plus Case Tab.

10-86
DUAL IMPEDANCE LINE MATCHING TRANSFORMER Comes with built-in High/Low switch. No wiring necessary. 1/4" Male mono plug with switchable input between 600W / 50KW to 600W XLR Male output with 6 inch cable.

10-87
DUAL IMPEDANCE LINE MATCHING TRANSFORMER
Comes with built-in High/Low switch. No wiring necessary. 1/4” mono Female jack with switchable input between 600W / 50KW to 600W XLR Female output.

10-88
DUAL IMPEDANCE LINE MATCHING TRANSFORMER
Comes with High/Low switch built in. No wiring necessary. XLR Male switchable input between 600W / 50KW to 600W XLR Female output.

10-99
DUAL IMPEDANCE LINE MATCHING TRANSFORMER
Comes with High/Low switch built in. No wiring necessary. 1/4” Male mono plug switchable input between 600W / 50KW to 600W XLR Female output on a 9 inch cable.

10-90
Ultra Mini Tie Microphone.
Excellent voice quality makes this lavalier microphone very versatile. Great for interviews, P.A., radio and T.V. network use, where free use of hands is necessary. Complete with battery, windscreen, tie clip, terminated to a 1/4” mono plug.

Specifications:
Polar Pattern Omni-Directional
Impedance 600W at 1 KHz
Frequency Response 50-64 dB / 50-16,000 Hz
Power Supply 1.5V LR-44 A-type / 1.5V
Sensitivity -64 dB /01 KHz
Cable with 1/4” mono plug................... 6m (20 feet)
Sound Noise Level Max. 130 dB

Battery for the 10-90 Microphone.

10-91
MINIATURE TIE CLASP MICROPHONE.
Extra small, only 3/8" diameter. Excellent voice quality makes this lavalier microphone very versatile. Great for interviews, P.A., radio and T.V. network use, where free use of hands is necessary. Complete with battery, windscreen, tie clip, terminated to a 3.5 mm plug. 10 ft. cord.

Specifications:
Type Electret Condenser Microphone
Impedance: 600W at 1 KHz
Frequency Response: 50 Hz–10 KHz
Package: Blister (Hanger Type)
Sensitivity: -60 dB ± 3 dB
Power Supply: 1.5V Button Cell (included) LR41
Length: 1 1/4"
Polar Pattern: Omni-Directional

Mic Clip for 10-91 Mic

Bulk Microphone Cable by the ft. used for the 10-95 Series cables.

Low loss microphone cable with black rubber jacket
22 gauge
2 conductor
Shielded

Price is per foot. The default is "1 ft." If you need longer, just change the quantity upon check-out.

10-95-1 (1 ft.)
PROFESSIONAL MICROPHONE EXTENSION CABLES
Male to Female XLR connectors, low loss. Cable with black rubber jacket, 22 gauge 2 conductor, shielded. Custom lengths available upon request.

10-95-1-5 (1.5 ft.)
PROFESSIONAL MICROPHONE EXTENSION CABLES
Male to Female XLR connectors, low loss. Cable with black rubber jacket, 22 gauge

10-95-3 (3 ft.)
PROFESSIONAL MICROPHONE EXTENSION CABLES
Male to Female XLR connectors, low loss. Cable with black rubber jacket, 22 gauge

10-95-6 (6 ft.)
PROFESSIONAL MICROPHONE EXTENSION CABLES
Male to Female XLR connectors, low loss. Cable with black rubber jacket, 22 gauge

10-95-10 (10 ft.)
PROFESSIONAL MICROPHONE EXTENSION CABLES
Male to Female XLR connectors, low loss. Cable with black rubber jacket, 22 gauge

10-95-15 (15 ft.)
PROFESSIONAL MICROPHONE EXTENSION CABLES
Male to Female XLR connectors, low loss. Cable with black rubber jacket, 22 gauge

10-95-20 (20 ft.)
PROFESSIONAL MICROPHONE EXTENSION CABLES
Male to Female XLR connectors, low loss. Cable with black rubber jacket, 22 gauge

10-95-25 (25 ft.)
PROFESSIONAL MICROPHONE EXTENSION CABLES
Male to Female XLR connectors, low loss. Cable with black rubber jacket, 22 gauge

10-95-50 (50 ft.)
PROFESSIONAL MICROPHONE EXTENSION CABLES
Male to Female XLR connectors, low loss. Cable with black rubber jacket, 22 gauge

10-95-100 (100 ft.)
PROFESSIONAL MICROPHONE EXTENSION CABLES
Male to Female XLR connectors, low loss. Cable with black rubber jacket, 22 gauge

10-95-2 (2 ft.)
PROFESSIONAL MICROPHONE EXTENSION CABLES
Male to Female XLR connectors, low loss. Cable with black rubber jacket, 22 gauge

Bulk 250 ft. Microphone Cable.

Note: the picture is of the extension cable that is made with the microphone cable.

10-96-10 (10 ft.)
PROFESSIONAL MICROPHONE EXTENSION CABLE
Female to Female XLR Cable using low-loss shielded, heavy gauge rubber jacketed cable. Color is black.

10-96-15
PROFESSIONAL MICROPHONE EXTENSION CABLES
Female to Female XLR Cable using low-loss shielded, heavy gauge rubber jacketed cable. Color is black.

10-96-20 (20 ft.)
PROFESSIONAL MICROPHONE EXTENSION CABLES
Female to Female XLR Cable using low-loss shielded, heavy gauge rubber jacketed cable. Color is black.

10-96-25 (25 ft.)
PROFESSIONAL MICROPHONE EXTENSION CABLES
Female to Female XLR Cable using low-loss shielded, heavy gauge rubber jacketed cable. Color is black.

10-97
MICROPHONE CLIP HOLDER (Tie Clip)
Fits 7/32" diameter microphones.
Lavalier Clasp-type Microphone Holder

10-89
DUAL IMPEDANCE LINE MATCHING TRANSFORMER
Comes with High/Low switch built in. No wiring necessary. 1/4” Female phone jack switchable input between 600W / 50KW to 600W XLR Male output.

10-105
Stereo Inline Variable Audio Attenuator
This item can be inserted into any Hi-Z audio path, provides signal attenuation from 0 db to full signal. Helps to balance audio signals from different pieces of equipment. Low profile design with easy to read volume control. RCA Male to Female cables are provided for easy Interfacing with equipment, this allows the unit to be hidden or exposed. Passive design requires no external power supply.

Specifications:
Frequency Response: 20hz - 20KHz
Cable lengths input, output: 15” each
Signal Level: 0dB - Full input signal level (avg. 200-400mv)
Dimensions: 3.1”(W) x 1.3”(H) x 1.1”(D)
Input Connectors: Male RCA plugs (left=white, right=red)
Color: Black
Output Connectors: Female RCA jacks (left=white, right=red)

10-110
SPDIF* Digital to Optical Coaxial Converter.
Designed to bridge the gap between home theater components with differing input/output formats. These small but important adapters convert digital signals from coax to optical or vice- versa, ensuring compatibility between TosLink/optical components and those with coax connections.

10-110 = RCA input to TosLink Female output.
10-119 = Toslink Input to RCA Female output
Size: 1.82”(W) x .88”(H) x 2.8”(L).
AC adapter included, 6Vdc 250mA.


*SPDIF=Sony Phillips Digital Interface Format.

10-112-BLANK
32 Point Patch Bay Panel
Professional audio series 32 point patch bay. The 10-112 combines high quality construction and optimum insertion of either BNC, BNC isolated or RCA type connectors (specify which type when ordering). Its steel construction makes the 10-112 ideal for rack mounting in the toughest environments. The 10-112 comes with 32 labeled patch points.

Specifications:
Dimensions: 19"(W) x 3.5"(H) x 1.35"(D)
Color: Black
Note: for illustration purposes only, the picture shows the panel with the RCA jacks.

10-112-BNC
32 Point Patch Bay Panel with BNC Jacks
Professional audio series 32 point patch bay. The 10-112 combines high quality construction and optimum insertion of BNC connectors. Its steel construction makes the 10-112 ideal for rack mounting in the toughest environments. The 10-112 comes with 32 labeled patch points.

Specifications:
Dimensions: 19"(W) x 3.5"(H) x 1.35"(D)
Color: Black

10-112-I-BNC
32 Point Patch Bay with Ground Isolated BNC Jacks
Professional audio series 32 point patch bay. The 10-112 combines high quality construction and optimum insertion of BNC isolated connectors. Its steel construction makes the 10-112 ideal for rack mounting in the toughest environments. The 10-112 comes with 32 labeled patch points.

Specifications:
Dimensions: 19"(W) x 3.5"(H) x 1.35"(D)
Color: Black

10-112-RCA
32 Point Patch Bay with RCA Jacks
Professional audio series 32 point patch bay. The 10-112 combines high quality construction and optimum insertion of RCA type connectors. Its steel construction makes the 10-112 ideal for rack mounting in the toughest environments. The 10-112 comes with 32 labeled patch points.

Specifications:
Dimensions: 19"(W) x 3.5"(H) x 1.35"(D)
Color: Black

10-113
MICROPHONE SPLITTER
Splits input of a single microphone to two different outputs, both input and output signals may be used to provide separate isolated feeds to both a house and monitor system, P.A. recording system or similar application where double outputs are required.

Specifications:
Input impedance: 600W
Dimensions: 4.75“ x 3.25“ x 1.75“
Output impedance: 600W
Frequency Response: 20-20KHz
Color: Black

10-115
STEREO HEADPHONE AMPLIFIER
2 inputs with individual volume controls.
200mW output at 8W.
Line input: 1V/47K. RCA input jacks, 3.5mm output jack.
AC adapter 12Vdc, 200mA included.
Black shielded metal chassis.
Size: 4.3”(W) x 1.7”(H) x 3.4”(D).

10-117
Fiber Optic Amplifier
This unit minimizes optical signal loss when long cable runs are used to connect optical digital audio devices. Input signal delivery 5 meters, output signal delivery 20 meters.
AC adapter included, 6Vdc 250mA.
Size: 2.8”(L) x 1.82”(W) x .88”(H).
Color is light gray.

10-119
Toslink Optical to SPDIF* Digital Coaxial Signal Converter.
Designed to bridge the gap between home theater components with differing input/output formats. These small but important adapters convert digital signals from coax to optical or vice- versa, ensuring compatibility between TosLink/optical components and those with coax connections.

10-110 = RCA input to TosLink Female output.
10-119 = Toslink Input to RCA Female output
Size: 1.82”(W) x .88”(H) x 2.8”(L).
AC adapter included, 6Vdc 250mA.


*SPDIF=Sony Phillips Digital Interface Format.

10-120 WIRELESS MICROPHONE RECEIVER This professional receiver is designed with the latest wireless technology. The low drop-out-free RF is excellent under adverse conditions. Audio performance is comparable to more expensive systems. It has "TRUE DIVERSITY" reception for excellent RF performance.

Specifications:
Operational Frequencies available*........VHF 169-216 MHz
ImageRejection.................................. Better than 60 dB
Working Range......... Up to 300' under average conditions
Reception Sensitivity....................... Better than 15dB uv
Distortion............................ Less than 1% (+/-15 KHz dev.)
Reception Selectivity...................................... +/-60 KHz
Frequency Response 40Hz-15KHz (+/-3dB)
Audio Output adjustment.................Min-30 dB, center 0dB,
Dynamic Range..................................... Better than 100dB
Audio Output Impedance........... 2.2Kohms unbalanced
Signal to Noise Ratio............................... Better than 95dB
Power Requirements.............................. 12 Vdc-300mA
Noise Reduction......2:1 Logarithmic compressor/expander
Size...................................... (mm) 280 W X 120 D X 37 H
Oscillator/Modulator.......................... Crystal controlled/Fm
Weight.............................................. 29 oz. (830 grams)
Color.......................................................................... Black
*25 separate frequencies available.
CHMHz - TV
A1 169.505 - NONE
A3 171.045 - NONE
A4* 171.905 - NONE
B1 175.400 - 7
B2 178.225 - 7
B3 179.200 - 7
B4 176.425 - 7
CHMHz TV
B5 177.650 - 7
C1 181.400 - 8
C2 184.025 - 8
C3 185.125 - 8
C4 181.850 - 8
C5 182.550 - 8
D1 187.800 - 9
CHMHz TV
D2 188.200 - 9
D3 190.600 - 9
D4 191.300 - 9
D5 189.325 - 9
D6 190.075 - 9
E1 194.400 - 10
E2 195.425 - 10
CHMHz TV
E3 196.800 - 10
E4 197.325 - 10
E5 193.825 - 10
E6 195.975 - 10
*171.905MHz is the default frequency.

Availability: ships same day.

10-126
WIRELESS MICROPHONE SYSTEM
This handheld microphone is ideal for videographers and public speaking. The VHF system has two switchable frequencies for selecting the cleanest sound and delivers a crystal clear sound range of more than 200 feet.

The transmitter is built into the handle of the microphone with no wires extending out of the base. The receiver has a cord terminated by a 3.5mm plug.

Specifications:
TRANSMITTER RECEIVER
Frequencies F1 - 169.445 MHz + F2 - 170.245 MHz
Frequencies F1 - 169.445 MHz + F2 - 170.245 MHz
Sensitivity.......................... 94dB spl ± 2.5KHz dev
Sensitivity................................ 2µV at S/N 40dB
Microphone......................... unidirectional-dynamic
Reception system......... double superheterodyne
Power supply... one 1.5v AA battery (not included)
Power supply......... one 9v battery (not included)
Power consumption..................................... 100mA
Power consumption................................... 25mA
Weight..................... 170 grams (including battery)
Weight.................. 128 grams (including battery)
Battery Life.................. 6-8 hours (alkaline battery)
Battery Life............... 6-8 hours (alkaline battery)
Color............................................................... Black
Color........................................................... Black

Availability: ships same day.

10-127
WIRELESS MICROPHONE SYSTEM
This professional quality VHF microphone system has a range of over 250 feet. With two switchable frequencies for the cleanest sound at an affordable price. Has clip on microphone. Ideal for camcorder use. A monitor earphone is included.

Specifications:
TRANSMITTER
Switchable Frequencies F1-169.445 MHz + F2-170.245 MHz
Sensitivity 94dB SPL at +/- 2.5KHz deviation
Sensitivity 2uV at S/N 40dB
Power consumption 30 mA
Power supply one 9 volt battery (not included)
Dimensions 86 x 60 x 21.5 mm
Weight 98 grams
Microphone Electret condenser
Color Black

RECEIVER:
Reception system Double superheterodyne system
Frequencies F1 169.445 MHz + F2 170.245 MHz
Power supply one 9 volt battery (not included)
Power consumption 25mA
Microphone output voltage: 8mV (load 10K W) impedence 300 W
Monitor output voltage: 1v (load 30 W) modfreq: 1 KHz Weight 128 grams (including battery)
Accessories supplied Earphone

10-130
WIRELESS MICROPHONE
This is a quality microphone for use with the Microphone Wireless Receiver. It delivers a 200 foot range for use with videography and public speaking. Its clean crystal controlled output is equal to more expensive systems. Unit shipped with default frequency of 171.905 MHz.


Specifications:
Operational Frequencies available. 169 - 216 MHz
Weight................................. 7.5 oz. (213 grams)
Sensitivity........ 94dB SPL at +/- 2.5 KHz deviation
Microphone...................... unidirectional-dynamic
Power supply... one 1.5v AA battery (not included)
RF output power.................. 10Mw (50Mw max.)
Power consumption...................................... 30mA
Color........................................................... Black

Availability: ships same day.

10-131 WIRELESS TRANSMITTER
This wireless transmitter has a clip on lapel microphone ideal for many uses. This microphone has a range of over 200 feet. It has two switchable frequencies for the clearest signal available. For use with the 10-120 receiver. Unit shipped with default frequency of 171.905 MHz. See page 1 for frequency chart.

Specifications:
Operational Frequencies available......... 169 - 216 MHz
Dimensions.................................... 86 x 60 x 21.5 mm
Sensitivity................ 94dB SPL @ +/- 2.5KHz deviation
Weight.............................................. 4 oz. (112 grams)
Power supply............. one 9 volt battery (not included)
Microphone....................................... Omni Directional
Power consumption............................................... 30mA
RF output power.......................... 30Mw (50Mw max.)
Color......................................................................... Black

Female XLR to 1/4” mono plug.
Black PVC jacketed cable, shielded.
Above wired: Pin 1 & 3 - ground
Pin 2 - hot

Female XLR to 1/4” mono plug.
Black PVC jacketed cable, shielded.
Above wired: Pin 1 & 3 - ground
Pin 2 - hot

Female XLR to 1/4” mono plug.
Black PVC jacketed cable, shielded.
Above wired: Pin 1 & 3 - ground
Pin 2 - hot

Male XLR to 1/4” mono plug.
Black PVC jacketed cable, shielded.
Above wired: Pin 1 & 3 - ground
Pin 2 - hot

Male XLR to 1/4” mono plug.
Black PVC jacketed cable, shielded.
Above wired: Pin 1 & 3 - ground Pin 2 - hot

Male XLR to 1/4” mono plug.
Black PVC jacketed cable, shielded.
Above wired: Pin 1 & 3 - ground
Pin 2 - hot

10-142-5
Female XLR to RCA Male plug
Black PVC jacketed cable, shielded.
Above wired: Pin 1 & 3 - ground
Pin 2 - hot
Available in 5, 10, and 15 ft.

10-142-10
Female XLR to RCA Male plug
Black PVC jacketed cable, shielded.
Above wired: Pin 1 & 3 - ground
Pin 2 - hot
Available in 5, 10, and 15 ft.

10-142-15
Female XLR to RCA Male plug
Black PVC jacketed cable, shielded.
Above wired: Pin 1 & 3 - ground
Pin 2 - hot
Available in 5, 10, and 15 ft.

10-143-5
Male XLR to RCA Male plug.
Black PVC jacketed cable, shielded.
Above wired: Pin 1 & 3 - ground
Pin 2 - hot

10-143-10
Male XLR to RCA Male plug.
Black PVC jacketed cable, shielded.
Above wired: Pin 1 & 3 - ground
Pin 2 - hot

10-143-15
Male XLR to RCA Male plug.
Black PVC jacketed cable, shielded.
Above wired: Pin 1 & 3 - ground
Pin 2 - hot

10-144
Female XLR to 3.5mm mono plug.
Black PVC jacketed cable, shielded.
Above wired: Pin 1 & 3 - ground / Pin 2 - hot

10-145
Female XLR to 3.5mm stereo plug.
Black PVC jacketed cable, shielded.
Above wired: Pin 1 & 3 - ground / Pin 2 - hot

10-145-1
Female XLR to 3.5mm stereo plug.
Black PVC jacketed cable, shielded.
Above wired: Pin 1 & 3 - ground / Pin 2 - hot

10-145RT-1
Female XLR to 3.5mm stereo plug.
Black PVC jacketed cable, shielded.
Above wired: Pin 1 & 3 - ground / Pin 2 - hot

10-146
Male XLR to 3.5mm mono plug, 6 ft. long.
Black PVC jacketed cable, shielded.
Above wired: Pin 1 & 3 - ground / Pin 2 - hot

10-147
Male XLR to 3.5mm stereo plug, 6 ft. long.
Black PVC jacketed cable, shielded.<
Above wired:
3.5mm tip to XLR pin 2
3.5mm sleeve and ring to XLR
Pin 1 & 3 - ground

Female XLR to 1/4” stereo plug.
Black PVC jacketed Cable, shielded.
Above wired: Pin 1-ground Pin 2-tip
Pin 3-ring

Female XLR to 1/4” stereo plug.
Black PVC jacketed Cable, shielded.
Above wired: Pin 1-ground Pin 2-tip
Pin 3-ring

Female XLR to 1/4” stereo plug.
Black PVC jacketed Cable, shielded.
Above wired: Pin 1-ground Pin 2-tip
Pin 3-ring

Female XLR to 1/4” stereo plug.
Black PVC jacketed Cable, shielded.
Above wired: Pin 1-ground Pin 2-tip
Pin 3-ring

10-149-3
Male XLR to 1/4” stereo plug.
Black PVC jacketed cable, shielded.
Above wired: Pin 1-ground Pin 2-tip
Pin 3-ring

10-149-6
Male XLR to 1/4” stereo plug.
Black PVC jacketed cable, shielded.
Above wired: Pin 1-ground Pin 2-tip
Pin 3-ring

10-149-10
Male XLR to 1/4” stereo plug.
Black PVC jacketed cable, shielded.
Above wired: Pin 1-ground Pin 2-tip
Pin 3-ring

10-149-15
Male XLR to 1/4” stereo plug.
Black PVC jacketed cable, shielded.
Above wired: Pin 1-ground Pin 2-tip
Pin 3-ring

10-150
XLR “Y” cable, one Male to two Females.
Black PVC jacketed cable, shielded.
Above wired Pin to Pin.
Cable length: 3 inches

10-150A
High quality 8mm “OFC” version of 10-150
cable length: 6.5 inches

10-151A
High Quality 8mm “OFC” version of 10-151
Cable length: 6.5 inches

10-151
XLR “Y” cable, one Female to two Males.
Black PVC jacketed cable, shielded.
Above wired Pin to Pin.
Cable length is 3 inches

10-152
XLR “Y” cable, two 3-pin XLR Females to a 3.5 mm stereo plug. 6 ft. long.
Black PVC jacketed cable, shielded.
Above wired Pin to Pin.
3.5mm Male XLR Female
Tip........................Pin 2
Ring......................Pin 3
Sleeve...................Pin 1

10-153-1
Female XLR to two RCA Male plugs.
Y cable, 1 ft. long. Uses flat style black
PVC jacketed cable, shielded.
Above wired: Pin 1-ground
Pin 2-tip (hot) RCA plug
Pin 3-tip (hot) RCA plug

10-154-1
One Female XLR to two RCA Female inline jacks. Y cable, 1 ft. long. Uses flat style black PVC jacketed cable, shielded.
Above wired:
Pin 1-ground
Pin 2-tip (hot) RCA jack
Pin 3-tip (hot) RCA jack

10-155-1
Male XLR to two RCA Male plugs.
Y cable, 1 ft. long. Uses flat style black PVC jacketed cable, shielded.
Above wired:
Pin 1-ground
Pin 2-tip (hot) RCA plug
Pin 3-tip (hot) RCA plug

10-156-1
Male XLR to two RCA Female inline jacks. Y cable, 1ft. long. Uses flat style black PVC jacketed cable, shielded.
Above wired:
Pin 1-ground
Pin 2-tip (hot) RCA jack
Pin 3-tip (hot) RCA jack

10-157-1
3.5mm stereo right angle plug to two XLR Female inline jacks. Y cable, 1 ft. long. Uses flat style black PVC jacketed cable, shielded.
Above wired:
#1 XLR:
Pin 1 & 3-ground (sleeve)
Pin 2-tip (hot) of 3.5 mm plug.
#2 XLR:
Pin 1 & 3-ground (sleeve)
Pin 2-ring of 3.5 mm plug.

10-158-6
3.5mm stereo straight plug to two XLR Male plugs. Y cable, 6 ft. long. Uses flat style black PVC jacketed cable, shielded.
Above wired:
#1 XLR:
Pin 1 & 3-ground (sleeve)
Pin 2-tip (hot) of 3.5 mm plug.
#2 XLR:
Pin 1 & 3-ground (sleeve)
Pin 2-ring of 3.5 mm plug.

10-160-10 (10 ft.)
MIG HIGH QUALITY XLR MALE TO FEMALE MICROPHONE CABLES
Designed for most audio applications, Calrad’s new MIG (mic, instrument & guitar) cable is constructed with 95% “OFC” braided copper with 22 gauge center conductors. High Density filler surrounds the conductors thereby reducing noise and strengthing tensile range. A special non-conductive epoxy is applied to the connection, then covered with heat shrink tubing. These cables are both durable and offer superior service.

10-160-100 (100 ft.)
MIG HIGH QUALITY XLR MALE TO FEMALE MICROPHONE CABLES
Designed for most audio applications, Calrad’s new MIG (mic, instrument & guitar) cable is constructed with 95% “OFC” braided copper with 22 gauge center conductors. High Density filler surrounds the conductors thereby reducing noise and strengthing tensile range. A special non-conductive epoxy is applied to the connection, then covered with heat shrink tubing. These cables are both durable and offer superior service.

10-160-15 (15 ft.)
MIG HIGH QUALITY XLR MALE TO FEMALE MICROPHONE CABLES
Designed for most audio applications, Calrad’s new MIG (mic, instrument & guitar) cable is constructed with 95% “OFC” braided copper with 22 gauge center conductors. High Density filler surrounds the conductors thereby reducing noise and strengthing tensile range. A special non-conductive epoxy is applied to the connection, then covered with heat shrink tubing. These cables are both durable and offer superior service.

10-160-25 (25 ft.)
MIG HIGH QUALITY XLR MALE TO FEMALE MICROPHONE CABLES
Designed for most audio applications, Calrad’s new MIG (mic, instrument & guitar) cable is constructed with 95% “OFC” braided copper with 22 gauge center conductors. High Density filler surrounds the conductors thereby reducing noise and strengthing tensile range. A special non-conductive epoxy is applied to the connection, then covered with heat shrink tubing. These cables are both durable and offer superior service.

10-160-50 (50 ft.)
MIG HIGH QUALITY XLR MALE TO FEMALE MICROPHONE CABLES
Designed for most audio applications, Calrad’s new MIG (mic, instrument & guitar) cable is constructed with 95% “OFC” braided copper with 22 gauge center conductors. High Density filler surrounds the conductors thereby reducing noise and strengthing tensile range. A special non-conductive epoxy is applied to the connection, then covered with heat shrink tubing. These cables are both durable and offer superior service.

10-161-10
MIG HIGH QUALITY 1/4” MONO MALE TO FEMALE XLR MICROPHONE CABLES
Designed for most audio applications, Calrad’s new MIG (mic, instrument & guitar) cable is constructed with 95% “OFC” braided copper with 22 gauge center conductors. High Density filler surrounds the conductors thereby reducing noise and strengthing tensile range. A special non-conductive epoxy is applied to the connection, then covered with heat shrink tubing. These cables are both durable and offer superior service.

10-161-25
MIG HIGH QUALITY 1/4” MONO MALE TO FEMALE XLR MICROPHONE CABLES
Designed for most audio applications, Calrad’s new MIG (mic, instrument & guitar) cable is constructed with 95% “OFC” braided copper with 22 gauge center conductors. High Density filler surrounds the conductors thereby reducing noise and strengthing tensile range. A special non-conductive epoxy is applied to the connection, then covered with heat shrink tubing. These cables are both durable and offer superior service.